|
6 AVG / M
The 6 AVG/M is a single pitch rotary machine with electric motorization and a top speed of 50 CPM.
The unit is suitable for filling rigid (metal and plastic and glass ) cans with
diameter ranging
from 35 to 66 mm
and height from 75 to 320 mm and with 1" and 20 mm (or 13-15-18 mm) collets.
The machine requires one size set for each diameter of cans and is equipped with a system to adapt
to different
heights of cans. The unit can also be equipped to place actuators, snap-seals, caps, etc.
The machine essentially consists of:
- stainless steel central body with protective guard with interlocking protections;
- a main support with 18 positions fixed to a central column;
- an intermittent rotating central table with 18 pockets to hold cans;
- a double conveyor belt to feed into and discharge cans from the central frame;
- a central manifold for all air exhausts to give a quiet operation.
The following stations can be installed on the machine to fulfill customer requirements: blowing station
for
can cleaning, product filling station, automatic valve or pump insertion station complete with valve
detection
head, vacuum station, crimping station, propellant gas filling station and automatic insertion
station for
components such as actuators, plugs, collars, seal caps etc.
The machine is suitable for fillings all kinds of propellants:
LPG, HFA, DME, CO2 or N2O, by means
of special I.F.S.
(Impact Filling System), gas metering cylinders.
All machine parts are easily accessible. A few simple adjustments allow a changeover to a different
type of production.
The electrical installation standard is IP54. If required, it can be made explosion-proof.
|
Brochure