|
52 SM
The expertise gained by Coster over many years of producing aerosol filling
equipment has resulted in a new generation of machines equipped with the latest technical innovations to enable
rapid changeovers (product fill, propellant fill, can size).
The machine essentially consists of:
- stainless steel central body with protective guard with interlocking protections;
- a main support with 24 positions fixed to a central column;
- an intermittent rotating central table with 24 pockets to hold cans;
- a double conveyor belt to feed into and discharge cans from the central
frame;
- a central manifold for all air exhausts enables quiet operation.
The machine is available both in the single pitch and in the double pitch version, with a production
capacity up to 85 CPM. The unit is suitable for filling rigid (metal and plastic and glass) cans with diameters ranging from
35 to 66 mm and heights from 75 to 320 mm and with 1" and 20 mm (or 13-15-18 mm) collets.
The machine requires one size set for each diameter of cans and is equipped with an automatic system to
adapt to different heights of cans. The unit can also be equipped to place actuators, snap-seals, caps, etc.
The following stations can be installed on the machine to fulfill customer requirements: blowing station for
can cleaning, product filling station, automatic valve or pump insertion station complete with valve detection
head, vacuum station, crimping station, propellant gas filling station and automatic insertion station for
components such as actuators, plugs, collars, seal caps etc.
The machine is suitable for filling all kinds of propellants: LPG, HFA, DME, CO2 or N2O (by means of special I.F.S.
(Impact Filling System) gas metering cylinders.
All machine parts are easily accessible. A few simple adjustments allow a changeover to a different type
of production. The electrical installation standard is IP55. If required, it can be made explosion-proof.
|
Brochure